Dobby's Signature

Watermelon dispenser – Easy way to make watermelon dispenser

Dobby
watermelon dispenser

 This watermelon dispenser was very much inspired by the watermelon dispensers I saw at a recent event I attended.  All lined up in a row, they were filled with different types of watermelon drink combos. One thing that stood out for me was the creativity behind the whole idea. Apart from that, this would also help save a whole lot of money. In this quick tutorial, I will show you an easy way to make watermelon dispenser. Without further ado, here’s how to make Watermelon dispenser – Easy way to make watermelon dispenser

watermelon dispenser

Water melon dispenser - Easy way to make watermelon dispenser

Yield: 6 Servings
Prep Time: 30 minutes
Total Time: 30 minutes

This watermelon dispenser was very much inspired by the watermelon dispensers I saw at a recent event I attended.  All lined up in a row, they were filled with different types of watermelon drink combos. One thing that stood out for me was the creativity behind the whole idea. Apart from that, this would also help save a whole lot of money 

Materials

  • 1 medium-sized watermelon

Tools

  • 1 plastic tap
  • Immersion blender

Instructions

  1. Step 1: Rinse the watermelon to remove the dirt from the body
  2. Step 2: With a knife, slice the top of the watermelon to create just enough space for the immersion blender to go through.
  3. Step 3: Immerse the blender into the watermelon and blend the watermelon. Pour the watermelon into the strainer and sieve to remove the blended seeds. Scrape out the remaining watermelon, blend and sieve.
  4. Step 4: Mark the part where the tap would go through and cut out with a sharp knife. Insert the tap and insert the sealing screw inside the watermelon.
  5. Step 5: Place the watermelon on a steady stand and pour the juice back into the watermelon and your watermelon dispenser is ready.
© Dobby
Category: Drinks

 

How to make Watermelon dispenser – Easy way to make watermelon dispenser

Directions:::

Step 1:To make the watermelon dispenser, Rinse the watermelon to remove the dirt from the body

 

Step 2: With a knife, slice the top of the watermelon to create just enough space for the immersion blender to go through.

Step 3: Immerse the blender into the watermelon and blend the watermelon. Pour the watermelon into the strainer and sieve to remove the blended seeds. Scrape out the remaining watermelon, blend and sieve.

Step 4: Mark the part where the tap would go through and cut out with a sharp knife. Insert the tap and insert the sealing screw inside the watermelon.

Step 5: Place the watermelon on a steady stand and pour the juice back into the watermelon and your watermelon dispenser is ready.